Attachment E

Polling Places

Within one month of the effective date of this Agreement, the County will request in writing that the owners and operators of the facilities listed below will remove the barriers to access for persons with disabilities as described below.  All of the barriers listed below are in reference to the areas of those facilities that are used for voting.  The request will specify that the remediation be completed within one year of the effective date of this Agreement.

A.        Twin Springs Baptist Church (1459 S. Westwood Boulevard, Poplar Bluff, MO): 

1.         Although there is a vertical sign reserving a space for persons with disabilities, the space lacks demarcation or other elements of an accessible parking space.  On the shortest accessible route to the accessible entrance, provide one van accessible space designated as reserved for people with disabilities.  Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide.  At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles.  At van accessible spaces, provide an additional "Van-Accessible" sign located below the International Symbol of Accessibility.  Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant.  Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

2.         There is a step leading to the sidewalk which leads to the accessible entrance.  Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public.  The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%).  Standards §§ 4.3, 4.5, Fig. 7.

3.         The ramp lacks handrails on both sides, the gripping surface of the handrail is not accessible, and the handrail does not extend at the top and bottom of the ramp.  Provide handrails that are between 1 inches and 1 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface.  Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings.  Standards § 4.8.5.

4.         There is a 1-1/4 inch vertical rise at the entry door threshold.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

5.         The entry door has twist style hardware.  Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate.  Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs.  Standards § 4.13.9.

B.         The Green Forest Church of Christ in Moark (2535 Township Line Road, Poplar Bluff, MO):

1.         The designated accessible parking spaces are not located on the shortest accessible route to the accessible entrance used for voting, and there is no space designated as van accessible.  Provide fully accessible parking that is located on the shortest accessible route to an accessible pedestrian entrance to the area used for voting.  Standards § 4.6.2.  On the shortest accessible route to the accessible entrance, provide one van accessible space designated as reserved for people with disabilities.  Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide.  At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles.  At van accessible spaces, provide an additional "Van-Accessible" sign located below the International Symbol of Accessibility.  Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant.  Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

2.         There is no firm, stable route from the accessible parking spaces to the accessible entrance of the area used for voting.  Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public.  The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%).  Standards §§ 4.3, 4.5, Fig. 7.

3.         There is a 1 inch vertical rise at the entry door threshold.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

4.         The entry door has knob hardware.  Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate.  Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs.  Standards § 4.13.9.

C.        Poplar Bluff 5th and 6th Grade Center in Oak Grove (3209 Oak Grove Road, Poplar Bluff, MO):

1.         The accessible parking spaces do not have vertical signs designating the spaces as reserved and lacks a space designated as van accessible.  At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles.  Provide one van accessible parking space. Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide.  At van accessible spaces, provide an additional "Van-Accessible" sign located below the International Symbol of Accessibility.  Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant.  Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

D.        Poplar Bluff R-I School District Administrative Building in Old Loughead (1110 N. Westwood Boulevard, Poplar Bluff, MO):

1.         There is no designated van-accessible parking space.  Ensure that van accessible spaces are a minimum of 96 inches wide and served by access aisles at least 96 inches wide.  At all spaces designated as reserved for persons with disabilities, provide vertical signs with the International Symbol of Accessibility located such that they cannot be obstructed by parked vehicles.  At van accessible spaces, provide an additional "Van-Accessible" sign located below the International Symbol of Accessibility.  Ensure that all spaces and access aisles for persons with disabilities are flat and level, with slopes and cross-slopes not exceeding 1:50 in all directions, and that their surfaces are firm, stable, and slip-resistant.  Standards §§ 4.1.2(5), 4.6, 4.30.7(1).

2.         The door has knob hardware.  Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate.  Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs.  Standards § 4.13.9.

E.         Butler County Fire Protection Station in Lake Road (966 Highway AA, Poplar Bluff, MO):

1.         There is a 1- inch vertical rise at the entry door threshold.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

2.         The entry door has twist-style hardware.  Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate.  Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs.  Standards § 4.13.9.

F.         Fisk (301 McKinnley Avenue, Fisk, MO):

1.         The entrance door has twist style hardware.    Provide a door with hardware that is easy to grasp with one hand and that does not require tight grasping, pinching, or twisting of the wrist to operate.  Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs.  Standards § 4.13.9.

2.         There is a 1-1/4 inch vertical rise at the entry door.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

G.        Brosley (#1 Royal drive, Brosley, MO):

1.         There is no accessible route to the level landing at the door, the path is long and over rough dirt and gravel.  Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public.  The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%).  Standards §§ 4.3, 4.5, Fig. 7.

2.         There is step leading to the entrance.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

3.         The entrance door has twist style hardware.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

H.        Qulin (406 Connecticut, Qulin, MO):

1.         The route from the parking area to the only interior ramp is excessive, circuitous and over gravel.  Provide at least one accessible route within the boundary of the site connecting these elements that, to the maximum extent feasible, coincides with the route for the general public.  The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%).  Standards §§ 4.3, 4.5, Fig. 7.

2.         The entrance door has twist style hardware.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

I.          Fagus (2104 Highway 51, Fagus, MO):

1.         The ramp handrails are not configured, with an appropriate gripping surface, they do not extend at the top and bottom of the ramp, and, for a significant portion of the ramp, there is a handrail of the ramp on only one side.  Provide handrails that are between 1 inches and 1 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface.  Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings.  Standards § 4.8.5.

2.         The ramp exceeds the maximum allowable slope of 1:12.  Provide a ramp that is at least 36 inches wide with a slope not exceeding 1:12 and a cross slope not exceeding 1:50; with level landings at least as wide as the ramp and 60 inches long at the top and bottom of the ramp; and with edge protection at least 2 inches high at the drop off sides.  Provide handrails that are between 1 inches and 1 inches in diameter with a continuous gripping surface along both sides of the ramp, extending at least 12 inches beyond the top and bottom of the ramp parallel with the ground surface.  Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate within their fittings.  Ensure that the ramp and approaches are designed so that water will not accumulate on walking surfaces.  Standards §§ 4.3.8, 4.8.

3.         One entry door has a vertical rise at the threshold of 2-1/2 inches and the other entry door has a vertical rise of 4 inches.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

4.         Both entrance doors have twist style hardware.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

J.          Coon Island (2316 Highway H, Neelyville, MO):

1.         The entrance door has twist style hardware.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

K.        Hillsville (11001 Highway 160, Harvieli, MO):

1.         There is a 1-3/4 inch vertical rise at the entry door threshold.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.

2.         The entry door has twist style hardware.  Provide an accessible door with a threshold that is no greater than inch, or is no greater than inch and is beveled with a slope no greater than 1:2.  Standards §§ 4.13.8, 4.5.2.